Business

Measure and Mount Honeycomb Shades

The appearance of the shades is referred to as cellular or honeycomb. When viewed from the side, they have a honeycomb structure that traps air to insulate the home. Cellular blinds resemble pleated shades, but because of the air pockets that insulate them, they may be made in more bespoke designs and cost more than other window coverings.Do you want to learn more? hop over to here

These pointers should be kept in mind while measuring a custom cellular blind. Use a metal tape measure instead than a yard stick or a fabric tape measure because they are less consistent and adaptable. Next, decide whether the cellular blinds will be installed within or outside the window frame. Make sure the colour, manufacturer, and number of your blinds match the interior of your room. Examine the samples and make a comparison with the catalogue. Then figure out where the lift cord is. The custom blind cannot be modified once all of the dimensions have been typed down and an order has been placed.

An inside mount is advised if your windows have more than an inch of room inside the frame. Inside-mounted cellular blinds take up less space and are less prone to be pushed down by accident. Around 12 inches of frame space is required for a smaller half-inch honeycomb shade. Larger shades necessitate a flush mount of more than two inches. If you go any lower, the shades will protrude past the frame.

Measure the breadth several times with a steel measuring tape. The smallest measurement, rounded down an eighth inch, will be the size of your blind. To ensure that the blinds fit, the custom blind maker will automatically subtract clearance. Measure your height twice and provide the higher number.

When the frame clearance is less than an inch, an outside mount should be used. Measure the molding’s dimensions, as here is where the brackets will be installed. Without moulding, add four inches to frames. This will give your cellular blinds two inches of overlap, ensuring privacy and light control. The distance between the top of the moulding and the sill will determine the height of your cellular shade. To accommodate windows that don’t have moulding, you’ll need roughly 2 inches.